Make the connection to the mud ring, place the new cover on the outlet, and screw in. Attach the mud rings to the gang box and slide the outlet in. Connect the black and red wires to the positive terminals and white wire to the negative terminals. Run the opposite end of the new wire into the gang box, leaving up to 8 inches of wire coming in. Cover each with a wire nut and electrical tape. Connect the wires that go into the old outlet’s gang box. Nail the gang box for the outlet to the stud. Pull off half-inch of insulation from the black, red, and white leads on both ends. Then cut two inches of sheathing from the ends of the wire. Ensure you use a stud finder to identify the stud where the outlet will be mounted.Ĭut a new wire and run it from the old location to the new one. Run the wires from the existing location to the new one. Cut open the drywall using the same dimensions as the existing outlet. Try to use rubber-handed tools and even a high-voltage glove to be sure of safety.Ĭhoose the new location of the appliance and mark out the spot for the outlet on the wall in that spot. If possible, let others in the home know you will be working with electricity and the power has to remain off till you are done. You can use an electrical tester to confirm that there is no power in the outlet. Next, take out the outlet cover and remove the outlet from the box. Use the following steps to relocate your 220-volt outlet.īefore you get started with the relocation, shut off the power to the area of appliances. It also helps to eliminate dangerous situations from using electrical extension cords. Relocating or installing a new 220-volt outlet is always ideal because it sets the outlet behind the appliance, giving the room a clean look. If you are renovating, remodeling, or moving any of these power-demanding appliances, you would have to move or install new 220-volt outlets to serve them. They usually have either 3 prong or 4 prong holes. You can identify 220-volt outlets as outlets that are larger and different-looking than others. It is built for power-demanding appliances, like ovens, dryers, and more. A 220-volt outlet is the most powerful outlet in the home.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |